The T400-4 amplifier is perfect for front/rear fading stereo systems or when dedicated amplification is required between front stage speakers and rear subwoofer(s). Thanks to the Dynamic Thermal Management, the small chassis design insures it can be installed in any location – like under front seats
Number of Channels 4
Rated Power
continuous power 60W x 4 @ 4-Ohms RMS
100W x 4 @ 2-Ohms RMS
200W x 2 @ 4-Ohms bridged RMS
2-Ohms x 2 bridged Stable
Total Power
total sum of 'rated power' 400 Watts
Dynamic Power
powercube measurement (info) 90 Watts x 2 @ 4-Ohms 0° Res FRONT
90 Watts x 2 @ 4-Ohms 0° Res REAR
154 Watts x 2 @ 2-Ohms 0° Res FRONT
154 Watts x 2 @ 2-Ohms 0° Res REAR
Bridgeable Yes
Efficiency (average) 69% @ 4-Ohm
68% @ 2-Ohm
Crossover Controls Front High-Pass (HP): 50-500Hz 24dB/octave
Butterworth
Front Low-Pass (LP): 50-500Hz 24dB/octave Butterworth
Rear High-Pass (HP): 50-500Hz 24dB/octave Butterworth
Rear Low-Pass (LP): 50-500Hz 24dB/octave Butterworth
Tone Controls Front Punch EQ
Treble: 0dB to +12dB @ 12kHz
Bass: 0dB to +18dB @ 45Hz
Rear Punch EQ
Treble: 0dB to +12dB @ 12kHz
Bass: 0dB to +18dB @ 45Hz
Signal Input Front Low level: 1 RCA pair
Rear Low level: 1 RCA pair
Signal Output n/a
Power Input Connector Block
Power Wire Gauge 4 AWG
Speaker Output Connector Screw terminal barrier strip
Speaker Wire Gauge 8 AWG to 18 AWG
Heat Sink Type Cast aluminum
Cooling Convection
Remote Controls Optional Remote Punch EQ
(overrides rear channel built-in Punch EQ)
Visual Indicators Power
Thermal
Protect
Circuit Topology Class Class A/B
Frequency Response 20Hz to 20kHz +/- 1dB
Shipping Weight 11.90 Lbs.
(5.39 Kg.)
Dimensions (HxWxL) 2.14 x 8.14 x 13.66 (in)
5.42 x 20.68 x 34.69 (cm)
Dieser Artikel ist momentan nicht verfügbar und wird auf Kundenwunsch bestellt.
Die Lieferung kann 4-8 Wochen dauern.
|
